Average Reviews:
(More customer reviews)I received this item 3 days ago. The item was shipped on time. It was minimally protected with thin foam sheet in a cardboard box. Happily mine was in good condition. Amazon nor Peck provide any in-route shipping tracking for this item.
The item itself is steam shaped laminated plywood with about a 40mil walnut veneer. The veneer appears raw, but may have a VERY slight polyurethane coating. Would suggest coating with a furniture polish at a minimum as it might stain from spills or leave a ring from drinking containers. The overall workmanship is average to good. There is some inadvertent staining of the edge lamination. One caveat, when inserting the screws during construction, be careful, as it would be very easy to push off the veneer at the screw's holes.
I have a very large ASUS G73JH-X3 Laptop and this tray provides enough width, with an inch on either side. However, it is a problem if I choose to have the main tray lower than the sides, as any USB attachments will hit the side pieces. The laptop is about 1" too deep for the tray, but the feet all fit, so it is not a huge issue. But again, my laptop is one of the largest on the market. Most laptops should have no issue fitting. By the way, I could never find any dimensions for this tray, so here they are; Depth of all pieces 12", width of main tray is 18-7/8", width of small side pieces is 8", height of all pieces is 7-1/4", weighs approx. 5 pounds., plywood thickness is 5/16".
The main tray CAN be tilted forward or back, however, because the main tray screws are fixed and not in slots like the outer pieces, the tray can only tilt a maximum of about 15 degrees forward or back.
Overall I am pleased. While I do think the Peck's Adjustable Laptop Tray is about $30 overpriced, it does the job it claims.
Click Here to see more reviews about: Peck's Adjustable Bent Wood Laptop bed tray Walnut
Click here for more information about Peck's Adjustable Bent Wood Laptop bed tray Walnut
No comments:
Post a Comment